Argentium Silver 960 – 25g

£70.00

Description

Additional information

Read about the Argentium Silver Clay https://www.aussiemetalclay.com/argentium-silver/

 

****You can NOT use any water, whether tap or distilled with Argentium Silver Clay. The ONLY fluid that can be used with the Argentium Clay is the Argentium Hydrate which has been specially formulated to work with it.

 

Argentium Kit: When you receive your package you will open it to find a package of Argentium powder and special binder and a tube of Kim’s Argentium Hydrate – these items will need to be mixed together to create your Argentium Clay.

 

Mix your liquid with only the amount of clay powder that you will use in that day. If you have any left over, roll the clay out as thin as you can get it and let completely dry. You can use at a later time by rehydrating.

 

SUGGESTED FIRING INSTRUCTIONS

*Do test strips to determine the appropriate temperature for your kiln*

Stage 1 burnoff

Wire rack

Ramp speed 4 /830c /1526f

Temp 600c /

Time 20min/45min depends on size and thickness

Stage 2 Firing

Fire in Premium activated coconut carbon

Ramp speed 5 or 995c

Temp 900c/1652f to 910/1670f

Time 2hours for most design

Bending 3 hours

But once you get a Resistance You will need to anneal it after about 3 small bends

My suggestion is get used to working with the clay understanding the sintering temperature then once you’re comfortable and you’ve done a few firings then you can try the bending techniques with 4 cards and up but don’t forget you must anneal between your bends.

 

 

 

Out of stock

Category:

Description

Argentium Kit: When you receive your package you will open it to find a package of Argentium powder and special binder and a tube of Kim’s Argentium Hydrate – these items will need to be mixed together to create your Argentium Clay.

Reviews

There are no reviews yet.

Be the first to review “Argentium Silver 960 – 25g”

Your email address will not be published. Required fields are marked *